Before we dive into this tutorial on how to build a DIY built-in bar with a mini fridge, let me start by saying that this project wasn't originally intended to be a tutorial. However, I'm excited to share our experience and insights so that you can create your own stylish built-in bar for your home.
Why We Decided to Share
Although every space is unique and replicating specific built-in tutorials can be challenging, we believe that our first attempt at a built-in bar can still offer valuable guidance. While we didn't follow all the traditional contractor methods or use an enclosed mini-fridge, we managed to create a stunning bar that caught the attention of Better Homes and Gardens magazine.
Choosing the Right Tools and Materials
To start this project, you'll need a few tools, including a jigsaw, circular saw, miter saw, nail gun, and drill. These tools will make the process easier, but you can also make do with just a jigsaw if needed.
Here's a shopping list of materials you'll require:
- Mini-fridge (we used this one)
- Pre-made cabinet (we used an 18×34.5×24 base cabinet)
- Sanded plywood
- 1x1/4x4
- 1x2x4
- 1x3x4
- 1x4x4
- 2x4x8s
- 2.5” Kreg screws
- 2.5 and 1.25” screws
- Nails (size depends on the boards used for your face frames)
- L-Brackets
- Vent
- Outlet extender
- Paintable caulk
- Clear caulk
- Paint (we used Sherwin Williams Naval)
Step-by-Step Guide
Step 1: Plan and Prep
Before diving into the construction, plan out the final dimensions of your bar. Our bar measured 44” wide, 25” deep, and 35.5” high (excluding the countertop). Once you have the measurements, create a cut list and shopping list.
Next, remove baseboards and cut the carpet (optional) in the area where you'll install the built-in bar. While professionals recommend removing baseboards, we decided to work around them to avoid additional expenses and potential mishaps.
Step 2: Frame Out the Structure
To ensure proper airflow and prevent the fridge from overheating, frame out the structure of the bar using 2x4s or a combination of 2x3s and 2x4s. Tape out the overall footprint and consider leaving extra space to accommodate the fridge. You'll also need to attach 2x4s between the cabinet and the wall.
Step 3: Cut the Plywood Side
Cut a piece of plywood to cover the outside of the fridge, matching the height and depth of the structure. If you didn't remove baseboards, make sure to cut the plywood to fit around them.
Step 4: Create a Vent Hole
Since the fridge you'll be using is not specifically designed for built-in use, create a hole for ventilation on the side of the built-in bar. Center the vent near the bottom of the side and secure it in place.
Step 5: Cut Hole for Outlet
To ensure access to the outlet behind the bar, install an outlet to the side of the cabinet. Cut a hole in the plywood side to accommodate the outlet.
Step 6: Add Face Frames
To give the bar a polished look and hide the rough framing, add face frames using decorative boards. Cut the boards to the desired sizes and attach them securely to the framing. Make sure to leave space for the fridge door to open properly.
Step 7: Prep for Paint
Cover the plywood with spackle to fill the wood grain and create a smoother surface, or use pre-primed or maple plywood if your budget allows. Apply wood filler or spackle to seams and nail holes, sand everything with 220 grit sandpaper, and caulk any gaps between the built-in and the wall. Prime the wood and sand again before painting.
Step 8: Paint
Choose a paint color that suits your style and paint the entire built-in bar using a brush or roller. Painting before installation may be more convenient, but you can also paint after installing everything.
Step 9: Add Countertop
Build a countertop using a 2x10 pine board or alternative material. Install the countertop by screwing it to the pre-made cabinet and secure the other side using L-brackets. Apply clear caulk to the areas where the countertop meets the wall for a seamless look.
Step 10: Wine Storage and Shelves
For added functionality, create slanted wine storage according to our tutorial. Use 2x10 boards for shelves and hang them using brackets. Add a wine glass rack beneath the lowest shelf for additional convenience.
There you have it! By following these steps, you can build your own DIY built-in bar with a mini fridge. We hope this guide gives you the confidence to create a stunning bar for your home. Share your progress with us on Instagram (@craftedbythehunts) – we'd love to see what you build!