Are you looking for a unique and whimsical addition to your child's bedroom? Look no further than the DIY Kids Teepee Bed! This amazing bed design by M.E Refined Designs will transport your little one to a world of imagination and adventure. Join us as we explore the plans for this incredible project.
But before we dive into the details, let's take a moment to appreciate the craftsmanship of M.E Refined Designs. Their portfolio is filled with stunning creations that will inspire and amaze you. Be sure to check them out on Instagram and Facebook for more incredible projects.
Now, let's get down to business and explore the dimensions and materials needed for this magical bed.
Dimensions
Materials
- 2 x 4 @ 8ft
- 2 x 2 @ 8ft
- 1 x 6 @ 8ft
- 1 x 4 @ 8ft
Cut List
Bed Base
- 4 - 2x4 @ 8"
- 2 - 2x2 @ 74"
- 2 - 1x6 @ 36"
- 2 - 1x6 @ 76"
- 11 - 1x4 @ 39 1/2"
Bed X Sides
- 2 - 1x4 @ 57 7/16" (50 degrees)
- 2 - 1x4 @ 72" (20 degrees)
- 1 - 1x4 @ 76"
- 2 - 1x4 @ 14 9/16" (50 degrees)
Now that we have all the materials and dimensions sorted, let's jump into the construction process.
Step 1: Building the Bed Base
Start by attaching the (76") 1x6 to the two (8") 2x4s using a Kreg Jig K4 Pocket Hole System. Don't forget to use wood glue and 2 1/2" Pocket Hole Screws for a sturdy connection. Repeat this step for the other side of the Kids Teepee Bed.
Step 2: Connecting the Bed Sides
Attach the two teepee bed sides together by using a Kreg Jig K4 Pocket Hole System and 1 1/2" setting. Secure them with 2 1/2" Pocket Hole Screws and wood glue. Repeat this step for the other side of the Kids Teepee Bed.
Step 3: Adding the Outer Supports
Attach the (74") 2x2 to the outer sides of the kids teepee bed. You can use a brad nailer and brad nails or wood screws for this step. Ensure that the 2x2 is flush with the bottom of the 1x6 stretcher. Repeat this step for the other side of the teepee bed frame.
Step 4: Securing the Bed Stretchers
Attach the 11 (39 1/2") 1x4 bed stretchers to the assembled bed frame using a brad nailer and brad nails. Remember to maintain a 3.75" spacing between each stretcher for optimal support.
Step 5: Building the Teepee Frame
Assemble the teepee portion of the bed by attaching the (57 7/16") 1x4 to the (72") 1x4 using a Kreg Jig K4 Pocket Hole System and a 3/4" setting. Use 1 1/4" Pocket Hole Screws and wood glue for a secure connection. Then, attach the (14 9/16") 1x4 to the assembled teepee frame. Remember to cut the outside end of the 1x4s at 20 degrees and the inside at 50 degrees.
Step 6: Attaching the Stretcher
Attach the 1x4 stretcher to the two assembled teepee frames using a Kreg Jig K4 Pocket Hole System and a 3/4" setting. Secure it with 1 1/4" Pocket Hole Screws and wood glue.
Step 7: Final Touches
Fill all visible pocket holes with wood filler for a clean and polished look. For a helpful technique on how to easily fill pocket holes, check out our guide here.
And there you have it! Your dreamy DIY Kids Teepee Bed is complete. The simplicity of this build, combined with the natural wood finish and black tips, creates a truly enchanting piece for your child's room.
We hope you enjoyed this amazing project by M.E Refined Designs. If you're in the Hesperia, California area, they can even build one for you. Be sure to visit their site for more details. Don't forget to share your own creations with us!
Thank you for joining us in creating magical memories for your little one. Happy building!
XOXO Ashley