Introduction
Are you struggling to adjust the legs of your IKEA table? Don't worry, you're not alone. IKEA is famous for its ready-to-assemble furniture, but sometimes the lack of instructions can make the process challenging. In this article, we will provide you with step-by-step guidance on adjusting IKEA table legs without the need for a user manual.
How to Adjust IKEA Table Legs
The T Type of Legs
If your IKEA table has T-type legs, you'll need an extra pair of hands and an Allen wrench to get started. Follow these steps:
Step 1 - Locate the Screw
While one person holds the opposite end of the table to prevent it from falling, the other person should locate the screw in the center of the leg.
Step 2 - Loosen the Screw
Using the Allen wrench, turn the screw counterclockwise to loosen it. Make sure not to tighten it accidentally, as this will prevent you from adjusting the leg.
Step 3 - Adjust the Leg
To increase the height of the table, grip the bottom part of the leg and push it up. If you need to lower the height, ask your helper to gently push down on the table until it reaches the desired level.
Step 4 - Lock the Leg
Once you've achieved the correct height, tighten the screw by turning it clockwise. This will lock the leg in place.
Step 5 - Adjust the Remaining Legs
Repeat steps 1 to 4 for the other legs, ensuring that they are all securely locked. It's important to have all the legs at the same height to avoid accidents.
Step 6 - Check Level
Use a tabletop level to check if the table is flat and all legs are at the same height. If adjustments are needed, repeat the previous steps until it is properly leveled.
The Four Leg Desk Unit
If your IKEA table has four straight adjustable legs, the process is simpler and can be done by one person. Follow these steps:
Step 1 - Unlock the Leg
Grasp the upper part of one leg with one hand, and with the other hand, turn the lower part counterclockwise to unlock the leg.
Step 2 - Adjust the Height
Push the inner leg up or down to adjust the table height. There are notches on the inner leg to indicate different height options.
Step 3 - Lock the Leg
Once you've set the desired height, turn the inner leg clockwise until it clicks and cannot be turned further. This will lock the leg in place.
Step 4 - Repeat on the Other Legs
Repeat the steps for the remaining three legs, making sure that all legs are at the same height and securely locked.
Step 5 - Check the Level
Use a tabletop level to ensure that the table is even and all legs are at the same height. Make any necessary adjustments until the table is level.
Final Tips
- If you are assembling the table for the first time, remember to turn the screws clockwise to prevent the legs from slipping.
- Be cautious not to overtighten the screws, as this may cause the locking mechanism to slip off. If it happens, collapse the leg and twist until it reconnects.
- For heavier tables, it's recommended to have an extra person assist you in turning it over.
- If you encounter any difficulties or need replacement parts, don't hesitate to contact IKEA's customer support helpline.
Now that you have the knowledge to adjust IKEA table legs, you can customize your furniture to meet your needs. Enjoy your newly adjusted table and make the most of your IKEA purchase.
IKEA coffee table
